Packaging & Shipping
| Package Size |
30.00cm * 30.00cm * 35.00cm |
| Package Gross Weight |
2kg |
| Lead Time |
To be negotiated ( > 1 Pieces) |
Product Description
| Supply voltage (V) |
220±10% V AC 50/60Hz |
| Installation environment |
Flat, no vibration and impact |
| Working ambient temperature (ºC) |
10 ~ 40 |
| Working humidity (%) |
< 70 |
| Cooling mode |
water-cooling |
| Applicable wavelength |
1064nm (±10nm) |
| Applicable power |
< 2000 w |
| collimation |
D20*5/F60 |
| Focusing |
D20*4.5/F150 |
| reflect |
30 * 14 T2 |
| Protective mirror specification |
18 * 2 |
| Maximum supporting pressure |
10bar |
| Focus vertical adjustment range |
±10mm |
| Spot adjustment range |
Line0-5mm |
| weight |
SUP20S 0. 8KG |
Our Advantages
1. Basic features: self-developed control system, set multiple safety alarms, smaller size, flexible operation, easy to start.
2. More stable: all parameters are visible, real-time monitoring of the whole machine status, avoiding problems in advance, more convenient troubleshooting and problem solving, to ensure that the welding head works stably.
3. technology: all parameters are visible, welding quality is more perfect, small deformation, high melting depth.
4. Stable parameters, high repeatability: determined nozzle air pressure and lens state, as long as the laser power is stable, the process parameters must be repeatable. Greatly improves the efficiency and at the same time reduces the operator requirements.
Company Profile
FAQ
1) Ensure reliable grounding before supplying power.
2)The laser output head is connected to the welding head. When using the unit, please inspect the laser output head carefully to prevent dust or other contamination, and use special lens paper when cleaning the laser output head.
3)If the equipment is not used in accordance with the methods specified in this instruction manual, it may be in an abnormal operating condition and cause damage.
4)When replacing the protective lens, make sure that it is properly protected.
5)Please note: When using the unit for the first time, make sure that the red light does not come out when it cannot come out of the copper nozzle.
){kind=link}